SMD5050 RGB flexible led strip light

Non-Waterproof SMD 5050 Flexible RGB LED Strip Light White or Black PCB

With this flexible LED strip, you can use it for your home or you could also use our RGB Controller to control the LED strip with our TTL to Relay output boards.

The LED strips works in 12V or 24V DC, which is the common for the red, green and blue LED. To turn the light, just connect the respective pin to GND (0V). Example to turn on red, connect the ‘R’ input/pad to ground.

With RGB LED strips, you could create all sort of color light by mixing the different RED, GREEN and BLUE intensity (brightness). This can be easily done using RGB controller with some simple MOSFET circuit.

These strip can be used with our RF remote controller to allow you to display with different colors and different preset modes of lighting effects. Example, fading from one color to another.

Weatherproof IP65 High Power 5050 SMD LED RGB Flexible Light Black Strips 10mm PCB.

Different PCB color are available

How to connect RGB Flexible led strip light?

I. Cut along the light strip tape wherever a dashed line divides two sets of positive and RGB connection points.

II. Peel away a portion of the light strip adhesive backing at one end. With the solderless clamp open to create two pieces of led strip, slide the strip end all the way into the solderless clamp. Close the hinged clamp.

RGB Flexible LED Strip T – connector

RGB Flexible LED Strip L – connector